1. Cut Overlapping Frequencies
Identify the frequency ranges where the guitars and bass are competing or masking each other. Apply subtle cuts around 200-500 Hz on the guitars and bass to reduce muddiness and create more separation between them.
2. Boost Bass Definition
To enhance the definition and punch of the bass without interfering with the guitars, apply a gentle boost around 50-100 Hz specifically on the bass. This will bring out the fundamental frequencies of the bass, reinforcing its presence without clashing with the guitars.
3. Shape Guitar Tonalities
Each guitar may have specific frequency ranges that contribute to its character. Identify the dominant frequencies for each guitar and apply selective cuts or boosts accordingly. For example, if one guitar has a prominent presence around 1 kHz, cut slightly in that range on that particular guitar to allow the other guitar or bass to breathe.
4. Carve Out Midrange for Guitars
Apply selective cuts in the midrange, typically around 500 Hz to 2 kHz, specifically on the guitars. This will create separation between the guitars and the bass. Experiment with narrow cuts within this range on the guitars to reduce masking and allow each guitar and the bass to stand out more in the mix.
5. Emphasize High-End Detail
Enhancing the high frequencies can help differentiate the guitars from the bass. Apply subtle boosts in the higher frequency range, around 5-8 kHz, specifically on the guitars. This will add sparkle and articulation to the guitars, making them more distinct and preventing them from being overshadowed by the bass.